/*
  DigitalReadSerial

  Reads a digital input on pin 2, prints the result to the Serial Monitor

  This example code is in the public domain.

  http://www.arduino.cc/en/Tutorial/DigitalReadSerial
*/

#include <SoftwareSerial.h>

SoftwareSerial mySerial(A0, A1); // RX, TX

// digital pin 2 has a pushbutton attached to it. Give it a name:
int pushButton = A3;

// the setup routine runs once when you press reset:
void setup() {
  // initialize serial communication at 9600 bits per second:
   mySerial.begin(9600);
  // make the pushbutton's pin an input:
  pinMode(pushButton, INPUT);
}

// the loop routine runs over and over again forever:
void loop() {
  // read the input pin:
  int buttonState = digitalRead(pushButton);
  // print out the state of the button:
  mySerial.println(buttonState);
  delay(100);        // delay in between reads for stability
}